Gold Member Since 2016
Audited Supplier

SENUO Filtration Technology (Tianjin) Co., Ltd.

Hollow Fiber Membrane, Ultrafiltration Membrane, Mbr Membrane manufacturer / supplier in China, offering 4 Inch Outside-in PVDF UF Membrane Modules for Water Treatment, Sewage Treatment Equipment for Water Treatment, 6 Inch Outside-in PVDF UF Membrane Modules for Water Treatment and so on.

(/ )

Supplier Homepage Company Show Technology SENUOFIL hydrophilic PES hollow fiber membrane


SENUOFIL hydrophilic PES hollow fiber membrane [Dec 11,2016]
SENUOFIL hydrophilic PES hollow fiber membrane
SENUOFIL hydrophilic PES hollow fiber membrane:
H-PES type hydrophilic polyethersulfone hollow fiber membranes made by SENUOFIL (Tianjin) have the characteristics of permanent hydrophilicity and weak binding with proteins, and results in good anti-fouling properties with steady running.
The characteristics:
1.  Large water flux: Because of inter-connective asymmetric porous structure, H-PES membranes with high water flux are available.
2. High separation efficiency: Because of narrow distribution of pore size for H-PES membranes, H-PES membranes have very high separation efficiency, and produce good quality water.
3.Excellent anti-fouling characteristic: The H-PES polyethersulfone hollow fiber membranes have excellent anti-fouling characteristic compared with other commercial membrane products because of their permanent hydrophilicity. As the result, the filtration performance keep steady, reduced the cleaning cycles, lengthened the membrane life, and decreased the running expense.
  Efficient cleaning: The hollow fiber membranes made from the hydrophilic polyethersulfone material has good performance with excellent anti-fouling properties. The cleaning of membranes becomes easy and efficient. The complete recovery of membrane performance could be achieved by the method of backwashing.  Strong resistance to chemicals: The excellent chemical and oxidative resistance for H-PES hollow fiber membrane is helpful to recover the performance of membrane and to ensure continuous and long filtration operation periods.
5. Low operating pressure: Usually the operating pressure is about 0.02-0.15Mpa for the continuous membrane filtration. Therefore reducing the energy consumption, investment and running cost.